Disconnect from your home WiFi network on your PC temporarily so your computer forces the traffic through the wired Ethernet cable connected to the Vonets device.
is a versatile, miniature Wi-Fi bridge and repeater designed for industrial and portable applications. Its ability to convert wired Ethernet devices to wireless, or to act as a repeater, makes it indispensable for connecting legacy equipment, Ethernet-only devices (like some security cameras, older printers, or game consoles), or extending WiFi coverage on the go.
Connect the built-in Ethernet tail of the VAP11G-300 directly to the RJ45 network port of your laptop. Step 3: Access the Local Web Interface vonets vap11g300 firmware update portable
Once logged into the dashboard, look for the or "Advanced Settings" tab. Within that menu, you will find the "Firmware Upgrade" option. Step 3: Upload the Firmware File
After the progress bar reaches 100%, the VAP11G-300 will automatically reboot. Disconnect from your home WiFi network on your
Download the official, exact firmware version matching your VAP11G-300 hardware revision from the official Vonets website. Do not unzip or modify the firmware file unless specified. Step 1: Connect the Vonets VAP11G-300 to Your PC
Do not confuse this with the standard VAP11G-300 (non-portable). The portable version has a built-in battery and a different firmware file. Using the wrong firmware will brick the device. Connect the built-in Ethernet tail of the VAP11G-300
Connect the Vonets VAP11G-300 USB power cable to your portable power bank or wall adapter. Wait approximately 1–2 minutes for the status LEDs to stabilize. The blue light indicates wireless functionality, and the green light indicates the ethernet link status. Step 2: Connect to the Vonets Management Network
Open your computer's -> Change Adapter Options . Right-click your Ethernet adapter and select Properties . Double-click Internet Protocol Version 4 (TCP/IPv4) . Select Use the following IP address and input: IP Address: 192.168.254.100 Subnet Mask: 255.255.255.0 Default Gateway: 192.168.254.254 Click OK and try loading http://192.168.254.254 again. Step 3: Flash the Firmware
To upload the new firmware, you must log into the local configuration page:
In the address bar, type the default configuration URL: http://vonets.cfg or the default IP address 192.168.254.254 . If requested, enter the default username and password: admin Password: admin 4. Apply the Update
