V2ray Mikrotik File
Next, configure the container settings:
I can provide the specific config.json template for your setup. V2ray Client on Mikrotik - GitHub Gist
| Feature | Container Method (Recommended) | External PC Method | | :--- | :--- | :--- | | | High (requires CLI & networking knowledge) | Medium (simple routing rules) | | Performance | Best (low-latency, direct routing) | Good (adds network hop) | | Feature Support | Full (supports all V2Ray/Xray features) | Full (runs on a separate PC) | | Dependency | Router's container feature | A separate, always-on PC | | Hardware Requirement | ARM router with sufficient RAM | Minimal for router, any PC | v2ray mikrotik
: Your router must have an ARM, ARM64, or x86 CPU. MIPSBE devices do not support containers.
Then bind container’s proxy port to a local address and redirect traffic as in Method 1. Next, configure the container settings: I can provide
/container/add remote-image=ghcr.io/xtls/xray-core:latest \ interface=veth-v2ray root-dir=usb1/xray env=v2ray_env \ logging=yes start=yes Use code with caution. Ensure usb1/xray exists on your storage device. Phase 3: Routing Traffic Through V2Ray
: It is highly recommended to use an external USB drive for the container's root directory to save internal flash memory. Configuration Pull Image : Use images like teddysun/v2ray xtls/xray-core Network Setup : Create a Then bind container’s proxy port to a local
: Ensure your masquerade NAT rule covers the 172.16.10.0/24 subnet. Verify that your MikroTik itself can resolve DNS and reach the external internet.
/container/add remote-image=v2fly/v2fly-core:v5.12.0 interface=veth1 root-dir=/disk1/v2ray
Mikrotik can act as a gateway that intercepts traffic and forwards it to an external V2Ray instance (on a VPS or local server) using routing rules and the 3. Key Configuration Steps
# Add a routing mark for proxied traffic /ip firewall mangle add chain=prerouting src-address=192.168.88.0/24 dst-address=!192.168.88.10 \ protocol=tcp action=mark-routing new-routing-mark=v2ray-mark