Locate the silver coin-shaped on the motherboard. Remove it for 2–3 minutes, then put it back.
Many Tronitek DVRs utilize a "super password" system based on the system date.
If there is no external button, you may need to open the case. Disconnect the power, locate the silver coin-cell battery (CR2032) on the motherboard, and remove it for about 2–5 minutes. This clears the volatile memory, which often includes the system time and password settings. 3. Software Recovery tronitek dvr admin password
Detailed recovery steps for similar brands can be found in the Vitek CCTV Support Guide 3. Hardware Factory Reset
Instead of opening ports on your router via Port Forwarding, setup a Virtual Private Network (VPN) on your home or business router. Connect your phone or laptop to the VPN first, then securely access your local DVR without exposing it to the open web. Locate the silver coin-shaped on the motherboard
Crucial: If the master password works, immediately navigate to the system settings and change your admin password to a permanent one. 4. Perform a Hardware Factory Reset
If you cannot access the software menu, you can physically reset the motherboard to factory defaults. If there is no external button, you may
Once you successfully log back into your Tronitek DVR, take these immediate steps to prevent future lockouts:
666666 | Password: 666666 (Commonly used for restricted tech support login)