Thyssenkrupp Levant Stair Lift Installation Manual Top !!better!! Now

This comprehensive guide covers the essentials of the ThyssenKrupp Levant stair lift installation, focusing on the key aspects found in a top-tier installation manual.

Use a tape measure to ensure the rail runs perfectly parallel to the wall or banister. Maintain a minimum clearance of 50 mm from the wall to the edge of the rail.

Visually inspect and manually trip all edge sensors to confirm instant shut-off. Mounting Hardware thyssenkrupp levant stair lift installation manual top

Ensure the upper mechanical stop is firmly bolted to prevent the carriage from over-traveling the rail. 2. Electrical & Charging (Top Station)

Reinstall and securely bolt the bottom mechanical end-stop block back into place. Step 4: Chair and Armrest Assembly This comprehensive guide covers the essentials of the

Contains specialized track splice bolts, self-tapping floor screws, spacers, and charging contacts. Section 3: Step-by-Step Rail Assembly and Anchoring

Rail, Carriage (lift unit), Seat, Battery pack, and Accessory box. Visually inspect and manually trip all edge sensors

The rail must be positioned to allow for a safe transition at the top landing without creating a tripping hazard. Distance and Clearance

Before any rail sections are attached to the stairs, a "dry fit" or pre-assembly is performed. This involves:

Drive the lift to the absolute top or bottom terminal until beeping stops. Safety edge depressed