Thomson Bluetooth Digital Alarm Clock Radio Btc2138 Manual 🔔

Used to initialize time settings and program radio presets.

Set two separate wake-up times for weekdays and weekends.

Turn off Bluetooth on your phone, turn it back on, and restart the clock. Delete "Thomson BTC2138" from your phone’s remembered devices list and attempt the pairing process from scratch. thomson bluetooth digital alarm clock radio btc2138 manual

Jump directly through saved frequencies by tapping the dedicated button while listening to the radio. Basic System Troubleshooting Problem Encountered Probable Cause Actionable Correction Steps Clock resets to 12:00 when unplugged Missing or expired backup batteries Install 2 fresh AA alkaline batteries into the base cavity. Bluetooth drops connection Signal interference or distance limit

This comprehensive guide serves as your complete user manual, walking you through initial setup, advanced configurations, and troubleshooting steps. Technical Specifications Used to initialize time settings and program radio presets

Press the button again to confirm the hours. The minute digits will begin flashing. Use the adjustment buttons to set the correct minutes. Press TIME SET one final time to lock in the correct time. Setting and Operating Alarms

Retains time/alarm settings only (does not power the display) walking you through initial setup

If you are looking at your to decode the symbols, here is the cheat sheet:

Choose your wake-up source by pressing the alarm button repeatedly to cycle through options: A standard beeping tone. RADIO: Tunes into your last-played FM radio station.

The large bar on top. Press to delay the alarm for 9 minutes or tap while the alarm is off to adjust LED brightness.

Press and hold either the Alarm 1 or Alarm 2 button until the alarm time display begins flashing.