When the process completes successfully, the slot grid will turn and display an "OK" or "PASS" message. Unplug the USB drive, wait five seconds, and plug it back in. Windows will prompt you to format the newly restored partition, and your drive will be fully functional again.
The exact returned by your diagnostic scan.
The software used at the factory to program these controllers and format the flash memory correctly. Prerequisites Before Working tc58nc6623 sss6698ba mptool work
If the drive is still recognized but unreadable, try non-destructive methods before flashing:
Insert the broken USB drive into a native USB 2.0 port on your computer. Avoid external hubs to maintain stable power draw. When the process completes successfully, the slot grid
Getting a TC58NC6623/
Complete Recovery Guide: How to Get Your TC58NC6623 / SSS6698BA MPTool to Work The exact returned by your diagnostic scan
Try a different USB port, a different computer, or try running the tool in Windows 7 Compatibility Mode.
Controller Vendor: Solid State Systems (3S) Controller Part-Number: SSS6698-BA / SSS6698-BB / TC58NC6623 Flash ID Code: 98DE9892 or 98DE8493 (Toshiba MLC NAND) VID (Vendor ID): e.g., 0951 (Kingston) or 0930 (Toshiba) PID (Product ID): e.g., 1665 Use code with caution.
This is a specific and often frustrating area of USB flash drive recovery, as this controller is known for being locked down, poorly documented, and incompatible with standard tools.
Before downloading any software, confirm that your drive uses the TC58NC6623 (often labeled as SSS6698-BA) controller.