Despite its reliability, you may encounter issues with your Skyrex drone. Here are some common problems and solutions:
: Unfold the front and rear wings (if applicable) and install the drone battery into the bottom compartment until it clicks. FCC Report 2. Binding & Calibration
Charge the drone’s lithium-ion battery fully before use. A typical charge takes roughly 60 minutes and provides about 5–10 minutes of flight time.
Common issues and solutions:
Pressing the dedicated RTH button triggers the drone to climb to its preset safe altitude, fly in a straight line back to its recorded takeoff spot, and land automatically. RTH also triggers automatically if the controller loses connection or the battery drops below 20%.
Fully charge all batteries. Fly in open areas away from routers.
Press and hold the power button on the drone for two seconds until the LEDs flash. skyrex drone manual
: Unmarked smooth surface. Use smooth, unmarked propellers.
Secure your smartphone into the clamp and connect it to the controller using the appropriate RC cable (Lightning, Type-C, or Micro-USB). 3. Pairing and Calibration
Scan the QR code located on the retail box to download the official (available for iOS and Android). Despite its reliability, you may encounter issues with
Never store LiPo batteries fully charged or completely depleted. Keep them at roughly 50% capacity (2 LEDs illuminated) if storing them for longer than 10 days. Propeller Installation
Turn the drone vertically (nose pointing directly at the ground or directly skyward) and rotate it 360 degrees clockwise.