Multifunction LCD display with a color-coded bar graph (Red for positive polarity, Blue for negative polarity).
Replace the 9V battery by sliding open the rear compartment panel. Use high-quality alkaline or manganese batteries for stable voltage regulation. Maintenance and Calibration
To maximize the performance and efficiency of your Simco FMX002 Manual Top:
: Beyond standard field measurement, it can assess ionizer balance (offset voltage) up to using an optional metal plate attachment. simco fmx002 manual top
Failing to ground the meter will result in highly inaccurate, fluctuating readings. 2. Powering On and Zeroing
| Category | Specification | | :--- | :--- | | | FMX-002 | | Type | Handheld, Non-Contact Electrostatic Field Meter | | Measurement Range (Electrostatic) | 0 to ±1.49 kV (Low range); ±1.0 kV to ±20.0 kV (High range) | | Resolution (Low / High) | 0.01 kV / 0.1 kV | | Ion Balance Range (w/optional plate) | 0 to ±200 V | | Distance Accuracy | Critical: Accuracy depends on maintaining 25mm ± 1mm from the target | | Distance Indication | Two converging LEDs; correct distance is achieved when the two red spots merge into one | | Accuracy | ±10% of reading | | Response Time | 1 second (update rate: 5 times per second) | | Display | Dual-mode (Digital bar graph & numeric); Positive = Red, Negative = Blue | | Additional Functions | Data Hold, Auto Zero, Auto Power Off (approx. 5 min), Low Battery Indicator | | Power Supply | 9V Alkaline Battery (e.g., 6F22, 6LR61, MN1604) | | Battery Life | ~30 hours of typical use | | Operating Environment | Temperature: 10°C to 40°C (50°F to 104°F); Humidity: < 60% RH (non-condensing) | | Dimensions (W x H x D) | 2.5" x 6.5" x 4.5" (approx. 65mm x 115mm x 25mm) | | Weight (including battery) | Approximately 130g to 200g (depending on source) | | Housing Material | Conductive ABS (Acrylonitrile Butadiene Styrene) plastic, with a ground snap connector for external grounding | | Certifications | CE Marked |
: The sensor is delicate. If an "Err" message appears on the display, it likely indicates sensor damage. Multifunction LCD display with a color-coded bar graph
The SIMCO FMX002 system consists of the following components:
The Simco FMX-002 is a powerful, precise, and user-friendly instrument when its features are fully understood. By mastering the ZERO , HOLD , and mode selection functions, and by always respecting the critical 25mm distance using the LED guide rings, you can ensure you are getting accurate, actionable measurements every time. This guide should serve as your primary reference for getting the most out of this industry-standard electrostatic fieldmeter.
A: No, the FMX-002 has been officially discontinued by SIMCO-Ion and replaced by the FMX-003 model. You may still find used units on the secondary market, but for a new device with a warranty, you should purchase an FMX-003. Maintenance and Calibration To maximize the performance and
To comply with ISO quality standards and ESD Association guidelines, the Simco FMX-002 requires periodic maintenance.
Before we dissect the manual and the top controls, let’s establish why this device has become a staple in ESD programs. The FMX-002 is a non-contact, high-precision voltmeter capable of measuring both positive and negative electrostatic field voltages from 0 to ±30 kV (at a 1-inch distance).