In rural areas with no Wi-Fi or cellular data, a portable update is the only option. As long as you have a generator or a charged battery and a USB stick, your WS-6933 can be updated to the latest satellite databases anytime, anywhere.
A common hardware issue involves the device failing to boot past a white screen. If you encounter this, try performing a few charge and discharge cycles to fully refresh the battery. Another recommended step is to toggle various system settings on and off, as this has been reported to resolve the issue for some users.
Connect the Mini-USB cable to the port on the side of the Satlink meter. satlink ws6933 software update portable
On devices like the Satlink WS6933, "software update" generally refers to the process of updating the , which is the permanent software programmed into the device's memory that controls all its operations.
The firmware is the operating system of your WS-6933. Manufacturers release updates for several reasons: In rural areas with no Wi-Fi or cellular
Once completed, the program will show "Update Success," and the device will restart automatically.
: Once complete, restart the WS-6933 normally. Navigate to System Setup in the menu; the first line will display the current SW Ver (Software Version) to confirm the update was successful. Where to Find Software If you encounter this, try performing a few
| Specification | Value | |---|---| | Transmission Standard | DVB-S/S2 | | Input Frequency | 950 - 2150 MHz | | Signal Input Level | -65 to -25 dBm | | Demodulation | QPSK/8PSK/16APSK | | Symbol Rate | 2 < Rs < 45 Mband (SCPC/MCPC) | | Power Supply | 7.4V/800mAh Li-Ion battery | | Net Weight | 0.25 kg | | Dimensions | 8x16x4 cm |
Open the Flash Loader tool, select the correct COM port, and browse for your .bin firmware file.
: Corrupted firmware file or interrupted flashing process (Bricked status).
Click and wait for the "Driver install success" notification. Step 2: Connect the Device to the PC