Linkrunner At 2000 Firmware Update ›

to download the latest firmware files. Device Preparation

– The utility shows: Erasing Flash Sector 7... The laptop makes the "USB disconnect" sound. You feel a cold sweat. Don't panic. It reconnects three seconds later. This is normal. This is normal. linkrunner at 2000 firmware update

You will need the latest version of the LinkRunner AT Manager software installed on your PC. This application serves as the bridge between your computer and the tester, allowing the firmware file to be transferred. to download the latest firmware files

You pull the out of your kit. The ruggedized rubber casing is scuffed from three years of drops into elevator shafts and ceiling tiles. You navigate to Tools > System Settings > About . You feel a cold sweat

If the device freezes, power it off completely by holding the power button for 10 seconds. Check your PC's power-saving settings to ensure the USB ports did not go into suspension mode, then restart the upgrade process.

Note: If your unit is running a version older than 2.4.3, you must update to at least this version to enable Link-Live cloud features. If you'd like, I can help you:

In the LinkRunner AT Manager application, click on the or Device menu at the top. Select Update Firmware (or Reflash Software ).