Now boasting a 100% brighter screen, increased processing power, and faster graphics engine, the Tiger Touch II is the most specified Titan console.
The Avolites Tiger Touch II represents the perfect combination of power and portability. This third-generation console is packed with enough power for complex shows, yet small and light enough to fly in standard hold luggage. The console features SMPTE timecode support and a redesigned button layout to match the entire Titan range.
In order to update the console to version 12 of the Titan, it will be necessary to purchase and install a USB dongle called AVOKEY.
Serial 02006 - 03065
You need to order:
- AVOKEYINT
- 1x5 way to USB-A Cable (spare part code 8000-6102)
Once you've received your AVOKEYINT and 1x5 way to USB-A Cable, you will be required to connect the USB-A Cable to the motherboard. This cable will provide an additional USB port for the AvoKey.
Click here to view the installation guide: https://www.avolites.com/Portals/0/Downloads/Manuals/AvoKey/8000-6102 TT2-2-3K AVOKEY upgrade with 1808-0028.pdf
Serial 03066 - 4020
You need to order only AVOKEYINT
Once you've received your AVOKEYINT, you will be required to connect this directly to the available (Blue) USB port inside the console (on the motherboard).
Click here to view the installation guide: https://www.avolites.com/Portals/0/Downloads/Manuals/AvoKey/8000-6101 TT2 AVOKEY no cable.pdf
Serial 04021 - 05001
You need to order only AVOKEYINT
Once you've received your AVOKEYINT, you will be required to connect this directly to the available (Red) USB port inside the console (on the motherboard).
Serial 5001 and above include a factory fitted AvoKey.
Therefore, you do not need to purchase an AvoKey.
Do you need assistance with or software driver setup ? Share public link
Open your Lectra plot management software (e.g., or Alys Manager ). Navigate to the Device Configuration menu. Select Lectra Alys 30 from the hardware drop-down menu.
Houses the inkjet printing head and moves horizontally across the paper.
Continuous inkjet system using proprietary Lectra fluids.
Ensure the machine is turned off before loading heavy paper rolls.
In the second-hand industrial machinery market, the value of a Lectra Alys 30 is significantly higher if it comes with complete documentation. A machine without the manual is a gamble; a machine with the exclusive service notes is a verified investment.
Lift the pinch roller lever. Feed the paper edge from the back of the machine, under the stabilizer bar, and pull it forward through the front platens.
| Feature | Standard Plotter | | | :--- | :--- | :--- | | Corner Cut | Pivot lift | Dynamic angle modulation (No lift) | | Material Stack | 1.5mm max | 2.5mm with overcut compensation | | Diagnostic Data | Basic error codes | Step-loss & motor torque graphs | | Vacuum Strategy | Full table suction | Zone chasing (VIP Protocol) |
Located in Manual Appendix B: "Service Diagnostics"
Serial RS-232, Centronics Parallel, or Ethernet via print server adapters (depending on the production year module).
If you want, I can: generate the manual content starting with the Quick Start and Hardware Tour sections, or produce the printable cheatsheet first. Which deliverable should I produce now?
I think that's a solid foundation. Let's start writing the story.
Do you need assistance with or software driver setup ? Share public link
Open your Lectra plot management software (e.g., or Alys Manager ). Navigate to the Device Configuration menu. Select Lectra Alys 30 from the hardware drop-down menu.
Houses the inkjet printing head and moves horizontally across the paper.
Continuous inkjet system using proprietary Lectra fluids.
Ensure the machine is turned off before loading heavy paper rolls.
In the second-hand industrial machinery market, the value of a Lectra Alys 30 is significantly higher if it comes with complete documentation. A machine without the manual is a gamble; a machine with the exclusive service notes is a verified investment.
Lift the pinch roller lever. Feed the paper edge from the back of the machine, under the stabilizer bar, and pull it forward through the front platens.
| Feature | Standard Plotter | | | :--- | :--- | :--- | | Corner Cut | Pivot lift | Dynamic angle modulation (No lift) | | Material Stack | 1.5mm max | 2.5mm with overcut compensation | | Diagnostic Data | Basic error codes | Step-loss & motor torque graphs | | Vacuum Strategy | Full table suction | Zone chasing (VIP Protocol) |
Located in Manual Appendix B: "Service Diagnostics"
Serial RS-232, Centronics Parallel, or Ethernet via print server adapters (depending on the production year module).
If you want, I can: generate the manual content starting with the Quick Start and Hardware Tour sections, or produce the printable cheatsheet first. Which deliverable should I produce now?
I think that's a solid foundation. Let's start writing the story.
