Once you find that, I can give you the from the official Intel manual.
Press the key repeatedly when the Intel splash screen appears.
Most boards bearing this layout footprint feature either Socket LGA 775 (supporting Core 2 Duo/Quad) or LGA 1155 (supporting 2nd and 3rd Generation Intel Core i3/i5/i7 processors). Intel Desktop Board 21 B6 E1 E2 Manual
The manual explicitly states for boards with "E1/E2" voltage markings:
It is crucial to understand that is not the primary model name of an Intel Desktop Board. It is generally part of the identifier (like a Scribd PDF implies regarding similar alphanumeric codes) for a specific revision or factory production batch. Once you find that, I can give you
Here’s a quick write-up based on the typical Intel Desktop Board model numbers (like or DH series — e.g., “21 B6 E1 E2” likely refers to board codes or silkscreen labels, not an official Intel model name).
Verify the wall outlet works and the switch on the back of the PSU is turned . The manual explicitly states for boards with "E1/E2"
Near the battery. Look for a 3-pin header labeled PASSWORD or CLR_CMOS .
SATA ports located on the bottom right edge. Blue/SATA III ports support 6 Gbps; black or grey ports support 3 Gbps. Power Connectors: A 24-pin Main Power Connector on the right edge.
Once you find that, I can give you the from the official Intel manual.
Press the key repeatedly when the Intel splash screen appears.
Most boards bearing this layout footprint feature either Socket LGA 775 (supporting Core 2 Duo/Quad) or LGA 1155 (supporting 2nd and 3rd Generation Intel Core i3/i5/i7 processors).
The manual explicitly states for boards with "E1/E2" voltage markings:
It is crucial to understand that is not the primary model name of an Intel Desktop Board. It is generally part of the identifier (like a Scribd PDF implies regarding similar alphanumeric codes) for a specific revision or factory production batch.
Here’s a quick write-up based on the typical Intel Desktop Board model numbers (like or DH series — e.g., “21 B6 E1 E2” likely refers to board codes or silkscreen labels, not an official Intel model name).
Verify the wall outlet works and the switch on the back of the PSU is turned .
Near the battery. Look for a 3-pin header labeled PASSWORD or CLR_CMOS .
SATA ports located on the bottom right edge. Blue/SATA III ports support 6 Gbps; black or grey ports support 3 Gbps. Power Connectors: A 24-pin Main Power Connector on the right edge.
|
Das Splash-Netzwerk: Splashp@ges
- Splashbooks
- Splashcomics
- Splashgames
Unsere Kooperationspartner: Sammlerecke - Chinabooks - Salleck Publications - Splitter - Cross Cult - Paninicomics - Die Neunte Comicsalon Erlangen Lustige Taschenbücher |