Register

Login

+
NewsClinicalJobs

Vets

All Vets newsSmall animalLivestockEquineExoticWork and well-beingInternational

Vet Nursing

All Vet Nursing newsSmall animalLivestockEquineExoticWork and well-beingOpinion

Business

All Business newsHuman resourcesBig 6SustainabilityFinanceDigitalPractice profilesPractice developments

+ More

VideosPodcastsDigital EditionCrossword

Fnirsi 1014d Firmware Link Updated Jun 2026

Ensure you successfully cleared the older cache or selected the correct, newly downloaded .bin file rather than an older backup file.

Analysis of Firmware Availability and Modification for the FNIRSI 1014D Oscilloscope

Delete any existing files on the oscilloscope's drive before proceeding. Copy the new FSI-1014.bin file to the root of this drive. Execution Safely eject/unmount the drive from your PC. Disconnect the USB cable. Power the oscilloscope off and then back on.

The latest firmware file (typically formatted as a .bin file). Step 1: Connect to Your Computer fnirsi 1014d firmware link

The update will run automatically at startup, showing a progress bar; this typically takes less than a minute. Important Considerations Hardware Variants

Updating the FNIRSI 1014D requires a standard USB-A to USB-B data cable (typically included in the box) and a Windows PC. Step 1: Prepare Your Device Turn off the FNIRSI 1014D completely. Connect the oscilloscope to your PC using the USB cable.

Sometimes their server goes down. If the official link is dead, you can find verified mirrors on the EEVblog Forum (FNIRSI 1014D thread) or the FNIRSI Facebook User Group . Ensure you successfully cleared the older cache or

Press and hold the button on the front panel while simultaneously pressing the Power button.

The device will initiate the update process. The screen may display the startup screen twice, followed by a horizontal progress bar.

A common issue after an update is that the screen image can shift, often to the left. If this happens, don't panic; it's a known problem caused by a mismatch between the firmware version and your specific hardware. The solution is simple: you likely need the other "screen version" of the update file. Re-download the alternate version, rename it to FSI-1014.bin , and repeat the update process. Execution Safely eject/unmount the drive from your PC

: Navigate to the oscilloscope's MENU and select USB export . Your computer should now recognize the device as a removable 8GB drive.

Updating the 1014D is generally straightforward but requires precision: FNIRSI 1014D - How to do a Firmaware Upgrade Tutorial

If you are on Windows 10 or 11, the drivers usually install automatically. If your PC does not recognize the scope, you may need to download the or the specific FNIRSI USB driver found in the same download folder as the firmware.

Connect the oscilloscope to your computer using a USB-A to USB-A cable.