: The meter supports one or two flow channels and can perform mathematical functions like averaging or calculating the difference between channels (A+B, A-B). Manual Resources
: Use an approved coupling paste or foil layer between the transducer face and the pipe to prevent air gaps. Understand the Mounting Modes :
Official and community-hosted versions of the user manual and technical specifications are available for reference: User Manual (Full) Internet Archive provides a free digital version of the manual ( UMFLUXUS_F7V4-0-2EN ) covering the ADM 7407. Quick Reference & Specs flexim fluxus adm 7407 user manual free
Connect the downstream transducer to the Downstream terminal.
The manual guides you through selecting pipe materials (steel, copper, glass, etc.) and entering wall thickness. It also details transducer spacing—typically set using Reflect Mode (on the same side of the pipe) for standard setups. : The meter supports one or two flow
relies on the . It utilizes two external clamp-on transducers to evaluate bi-directional liquid flow speeds accurately without touching the fluid. Technical Feature Specification Detail Measurement Principle Transit-time difference correlation Flow Velocity Range 0.01 to 25 m/s Standard Accuracy ±1.6% of reading ±0.01 m/s Repeatability 0.15% of reading ±0.01 m/s Enclosure Rating IP65 protection for harsh environments Power Supply 100...240 VAC or 12/24/48 VDC Supported Pipe Diameters 10 mm to 6500 mm (depending on transducer type) Core Quantities Volume flow, mass flow, flow velocity, heat flow Step-by-Step Programming Guide Programming the
Unlike consumer electronics, where a manual is included in the box and readily available for download on a public website, industrial instrumentation manuals are often treated as proprietary technical literature. Manufacturers like Flexim typically distribute these manuals directly to the buyer or registered partners. Quick Reference & Specs Connect the downstream transducer
The FLUXUS ADM 7407 utilizes transit-time difference ultrasonic technology. By sending ultrasonic signals back and forth through the fluid, the device calculates the flow velocity based on the time delay between the upstream and downstream signals. Key Specifications Ultrasonic transit-time difference.
Proper mechanical installation of clamp-on hardware secures maximum signal integrity.