While a dedicated PDF for the can be challenging to locate, the information provided in this guide—drawn directly from Exide’s official documentation for the 2100 SP/OP, HP, and other industrial chargers—covers virtually every aspect of safe operation, troubleshooting, and maintenance.
Connect the charger output cable to the battery connector. The charger will automatically detect the battery.
I'll cite the sources I've found: the weatherproof charger page, the 2100 SP/OP manual, and any other relevant details. I'll also include a note about the possible model variations. I should also include information on how to identify the correct manual using the part number from the charger's rating plate. exide 2100 rp charger manual free
Yes, the 2100 RP has a "float/maintenance" mode. However, verify this in your manual. For long-term storage, press Rate down to 2A after the battery reaches 100%.
If your incoming shop voltage is 240V but the charger internal jumps are set to 208V, the charger will run excessively hot and overcharge the battery. Conversely, undersetting the taps will cause low output and extended charge times. While a dedicated PDF for the can be
Once the LED indicates the battery is fully charged, unplug the charger from the AC outlet before removing the clamps. Important Safety Tips
: It almost certainly features microprocessor-controlled, fully automatic charging. The charger would communicate with the battery to deliver the correct charge, preventing overcharging and extending battery life. I'll cite the sources I've found: the weatherproof
While you search for the PDF, here is a practical breakdown of how the Exide 2100 RP operates. Most manuals follow this logic:
What is the or part number from the data plate?