Ericsson Mini Link Cli Commands -

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

Product name (e.g., MINI-LINK 6352), serial number, software version, uptime, temperature, and power supply status.

When troubleshooting intermittent drops or bit errors, use the performance monitoring (PM) and active alarm commands. show alarms active Use code with caution. ericsson mini link cli commands

show radio counters : Displays performance metrics like Errored Seconds (ES), Severely Errored Seconds (SES), and Received Signal Level (RSL) indications. 4. Networking & IP Configuration

show system info # Shows: Node name, software version, uptime, serial number This public link is valid for 7 days

: Activates a loopback on the selected controller for testing; use no loopback to remove it. rsyslog enable : Enables Syslog change detection.

admin/radio/1> radio set tx-power=15 # In dBm admin/radio/1> radio set adapt-modulation-status=enable admin/radio/1> radio set max-modulation=64QAM admin/radio/1> radio set min-modulation=4QAM Can’t copy the link right now

| Command | Description | |---------|-------------| | enable | Enter privileged mode | | disable | Exit privileged mode | | configure terminal | Enter global configuration mode | | exit | Move down one level in command mode | | end | Return to privileged exec mode | | show running-config | Display current active configuration | | show startup-config | Display saved configuration | | write memory | Save running config to startup config | | copy running-config startup-config | Alternative save command | | reboot | Restart the node | | ping <ip> | Network connectivity test | | traceroute <ip> | Path discovery |

| Command | Description | |---------|-------------| | show radio link | Overview of all radio links | | show radio link <id> | Detailed parameters for specific link | | show radio performance | Tx/Rx levels, modulation, bit error rate (BER) | | show radio adaptive modulation | Current and possible modulations | | show radio atpc | Automatic Transmit Power Control status | | show radio xpic | Cross Polarization Interference Cancellation status (for XPIC links) | | radio loopback <id> internal | Internal loopback on radio interface for testing | | radio loopback <id> external | External loopback | | clear radio performance <id> | Reset performance counters |

To help tailor further assistance, could you share the specific you are working with (e.g., TN, PT, 6000)? Also, Share public link