The most common cause is not having the correct model selected in the program. Double-check you have "Epson L3111" selected. Another possibility is a version mismatch; ensure the adjustment program is specifically for the L3111.
: Turn the printer off and then back on when prompted. The red lights should stop flashing, and the printer status should return to "Ready".
| Error Code | Cause | Solution in Context of EAP | | :--- | :--- | :--- | | | Printer left Service Mode too soon. | Re-enter Service Mode; keep printer awake. | | Timeout 0x01 | Wrong driver loaded. | Use generic "Epson USB Printer" driver in Windows. | | Counter resets to 100% | E2PROM checksum mismatch. | Click "Initial Ink Charge" first, then reset counter. | | "Check" button greyed out | Wrong software version. | Verify you have the L3111 version (not L3110 or L3150). | epson adjustment program l3111 fix
Press the physical power button on your Epson L3111 to turn it off. Click on the computer screen.
If you try to use WiFi, the program will likely show a "Communication Error". The most common cause is not having the
Some versions allow a one-time "trial" reset to 80% capacity using a specific trial code.
Step-by-Step Guide: Using the Epson Adjustment Program for L3111 : Turn the printer off and then back on when prompted
If you reset the electronic counter multiple times without addressing the physical sponges, excess ink will eventually overflow from the bottom of the printer, risking permanent damage to your desk, carpets, or the printer's internal circuitry. For a permanent fix, you should eventually remove the waste ink tank from the back of the printer, wash and dry the sponges, or replace them entirely. Step-by-Step Guide: Resetting the Epson L3111
The Epson Adjustment Program (often called a "resetter" or "AdjProg") is a specialized service tool designed for technicians to perform in-depth maintenance on Epson printers. For the Epson L3111 owner, its primary purpose is to fix the issue—the most common reason this printer stops working.