Select . Choose an existing port (e.g., USB001 ).
During the installation wizard, you will see a prompt to select the . Choose POS-80 or 80mm Series .
Visit the official Code Soft international website or your regional distributor's download portal. code soft tp-3160s driver
Ensure the TP-3160S is connected to your computer via USB (or appropriate port) and that the printer power is OFF .
Yes. The Windows 10 x64 driver works perfectly on Windows 11. However, ensure you run the installer in Windows 10 Compatibility Mode if you encounter installation hangs. Select
Go to > Devices and Printers . Right-click your TP-3160S, select Printer Properties , and click Print Test Page . If a short receipt prints successfully, your driver is operating correctly. 2. Setting Up the Automatic Paper Cutter Thermal printers use an internal knife to slice receipts.
If you are using TEKLYNX CODESOFT for label design, it is recommended to use rather than standard Windows drivers. Native drivers are embedded within the software and offer superior "WYSIWYG" (What You See Is What You Get) print accuracy. How to Add a Printer Driver in CODESOFT Choose POS-80 or 80mm Series
Before installing the driver, verify that your hardware setup matches the printer's capabilities. Direct thermal line printing. Print Speed: Up to 160mm per second.
Click . A small printer icon will now indicate the printer is using the internal native driver. 3. Update with Driver Service Pack (DSP)
Connect the printer to your computer using the preferred interface cable (USB is most common).