Using the kitchen sink while someone is in the shower will cause a sudden drop in pressure and a spike in temperature.
The valve requires secure fixing and must be supported by a baton or noggin behind the wall.
Turn off the water supply, unscrew the mixer from the supply pipes, and inspect the mesh filters inside the inlet tails. Clean out any hard water scale or construction debris. Issue 2: Water Runs Constantly Cold or Lukewarm
If you need help troubleshooting your specific shower setup, let me know: caraflo v200 shower instructions
Connect the other end of the hose to the shower handset, ensuring the second sealing washer is securely in place. 🚿 Operating Instructions
Turn off the 12V supply to the water pump to prevent accidental activation.
Before using your Caraflo V200 shower, make sure you have read and understood the following: Using the kitchen sink while someone is in
Wait 15 seconds after each minor shift until the stream registers a safe max temperature (typically 38°C to 43°C).
The is a thermostatic mixer shower designed for built-in or exposed valve installations . It maintains stable water temperature even when other taps are used, preventing scalding or sudden cold shocks.
Operating the Caraflo V200 is straightforward due to its dual-control design. One handle controls the water volume (flow rate), while the other controls the temperature. Turning the Water On and Off Clean out any hard water scale or construction debris
If your shower stays consistently lukewarm or loses water pressure completely, the internal cartridge likely needs replacement. Caraflo V200 Shower Mixer Tap Thermostatic Chrome
Blocked inlet filters or insufficient water system pressure.
Turn the thermostatic handle (typically the right knob) toward the red indicators for hotter water, or toward the blue indicators for cooler water.
To install the Caraflo V200 shower, follow these steps: