Avery Berkel L126 Calibration | CERTIFIED |

Ensure there are no strong air currents from fans or windows. 2. Physical Inspection

The scale needs to know what "zero" looks like with nothing on the platform. Ensure the scale platform is empty and clean. Select the option from the menu.

: Place your certified weights back on the platter. Confirm the display matches the mass exactly.

Always use certified test weights (Class F or better) that have a known traceable accuracy. Do not use sandbags, water containers, or uncertified metal pieces – they are rarely accurate enough for legal‑for‑trade calibration. avery berkel l126 calibration

Regular calibration of your Avery Berkel L126 scale is essential to ensure accurate weighing performance and compliance with regulatory requirements. By following this step-by-step guide, you can maintain the accuracy and reliability of your scale, preventing errors and losses. If you're unsure about any aspect of the calibration process, consult the user manual or contact a qualified technician for assistance.

Clear the pan entirely and restart the calibration sequence.

The bright green LED screen will transition from the active weight interface to read (Diagnostics Mode). Ensure there are no strong air currents from fans or windows

The scale will prompt you to select the desired unit of measurement (e.g., pounds or ounces). Press the red button repeatedly to cycle through units until your preferred system appears. Press the blue TEST button to lock in the chosen unit.

Locate the calibration security switch (usually found behind a lead seal or a small panel on the underside/back of the indicator). Move the switch to the or CAL position.

For deeper infrastructure integration, consult official documentation on the Avery Berkel Product Support portal. Ensure the scale platform is empty and clean

After restarting, place the 10 lb weight back on the scale to verify the reading matches the certified weight exactly. If the reading fluctuates or shows an error, repeat the process ensuring the scale is perfectly level.

Standardized (typically 10 lbs or as specified by your maximum capacity). A clear platform with no items or debris. 2. Step-by-Step Calibration Procedure

: Place the scale on a flat, level surface away from vibrations or drafts. Certified Weights

Power on the unit for at least 15–30 minutes to allow the internal electronics to stabilize. Step 1: Entering Calibration Mode