This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
The software only resets the digital counter . It does not physically clean or replace the ink pads. If your pads are genuinely full and you reset the counter without changing them, ink will eventually overflow inside the printer, causing damage to the circuit boards and ruining your furniture.
Epson printers track waste ink via a software counter. After printing thousands of pages, the printer believes the pads are saturated. Even if the pads are dry or you’ve cleaned them, the printer won’t function until you reset that counter using the adjustment program.
Turn the printer back on and confirm that the error has cleared. You should now be able to print normally. If the blinking lights persist, you may need to restart your computer and repeat the process. adjustment program epson l3150
The Ultimate Guide to the Epson L3150 Adjustment Program: Fix Blinking Lights and Waste Ink Pad Errors
Every time your printer performs a cleaning cycle or charges the print head, a small amount of ink is flushed into a waste ink pad located at the bottom of the machine. To prevent these pads from overflowing and leaking ink onto your desk, Epson programs the printer to stop working once it estimates the pads are full.
If you reset the counter without addressing the physical ink accumulation, the pads will eventually overflow, spilling permanent ink onto your workspace or corroding the printer's internal boards. This public link is valid for 7 days
To understand why the adjustment program is necessary, it helps to understand how your printer manages waste ink.
This indicates the software cannot see the printer. Check your USB cable connection, ensure no print jobs are stuck in the Windows print queue, and verify that the correct USB port was selected in the program setup.
The is a powerful tool that can resurrect a "dead" Epson L3150 in under two minutes. But like a medical defibrillator, it saves the patient temporarily—real health requires proper maintenance. Use it wisely, and your EcoTank will keep printing for thousands of pages more. Can’t copy the link right now
If the printer was dead for a long time, go to or “Ink Charge” in the program. This will force the printer to pump ink through the system (takes ~5 minutes). Warning: This uses a lot of ink.
Open the extracted folder and right-click on AdjProg.exe . Select .