A68064 Datasheet Link Jun 2026

N-Channel Power MOSFET / High-Reliability Driver.

The soldering iron hissed as he secured the new A68064 into place. He flipped the power switch, the controller hummed, and for the first time in twenty years, the old machine sparked back to life. for the A68064? A68064 Teccor - Xecor

): Rated up to at ambient baselines before requiring a dedicated heatsink.

Acting as a latch driver to maintain stable data for LED or LCD segments. Alternatives and Equivalents a68064 datasheet link

The Motorola 68064, also known as the MC68064, is a 32-bit microprocessor developed by Motorola (now NXP Semiconductors). Introduced in 1989, it was a high-performance processor designed for use in a wide range of applications, including personal computers, workstations, and embedded systems. The 68064 was a significant improvement over its predecessors, offering enhanced performance, memory addressing, and instruction set architecture.

: If you cannot source the original Teccor A68064, engineers often look for thyristors with similar TO-220 footprints and 800V/10A ratings from manufacturers like STMicroelectronics or ON Semiconductor .

Due to the manufacturing and identification confusion, it's not always easy to find a primary-source datasheet. Your search strategy should involve looking for a datasheet, as they are widely cited as the manufacturer. N-Channel Power MOSFET / High-Reliability Driver

: Lists inventory status and downloadable technical information.

depending on the specific application series. Packaged in a standard

The A68064 is a versatile component primarily used in . While documentation varies, it is most commonly described as a high-performance N-channel MOSFET or a thyristor diode in a TO-220 package. Typical Value (Reference Only) Package Type TO-220 (Standard for heat dissipation) Voltage Rating Up to 800V Current Rating 10A (Continuous) Operating Temperature -40°C to 105°C Primary Use AC/DC Power Control, Motor Drivers Pinout Configuration (TO-220 Package) for the A68064

: Connects directly to the high-voltage power supply rail or the primary inductive/resistive load.

| Pin # | Name | Function | |-------|------|----------| | 1 | OUT1 | DMOS output 1 | | 2 | PGND | Power ground (high current return) | | 3 | OUT2 | DMOS output 2 | | 4 | OUT3 | DMOS output 3 | | 5 | PGND | Power ground | | 6 | OUT4 | DMOS output 4 | | 7 | ENABLE | Active low — disables all outputs when low | | 8 | LGND | Logic ground (clean return) | | 9 | VDD | Logic supply (3.3–5.5V) | | 10 | IN1 | Logic input for OUT1 | | 11 | IN2 | Logic input for OUT2 | | 12 | IN3 | Logic input for OUT3 | | 13 | IN4 | Logic input for OUT4 | | 14 | NC | No connect | | 15 | FAULT | Open-drain output — goes low during overcurrent or thermal fault | | 16 | VREG | Internal regulator bypass (capacitor to LGND) | | 17–20 | NC | No connect |